Please watch the assembly instruction video prior to assembly - CosmoGlo Assembly Page

Clamp Styles

Each CosmoGlo light has an adjustable clamp to help secure the light when positioned for use. Your individual CosmoGlo may be equipped with one of two different clamp styles. While both are functional and easy to use, take note of the style you have as they differ in setup and adjustment.

Turn Knob Style Clamp

The new clamp has a turn knob for tightening, and is secured to your poles with one normal phillips style screw.
During any and all pole adjustments, make sure to loosen your clamps to allow the poles to move freely rather than forcing the poles to budge causing scratching. Cosmetic damages caused by assembly errors are not covered under warranty.

Flap Style Clamp

Our original clamps have a reverse threaded screw and must be turned right to loosen and left to tighten.
The clamp flap will need to be in the upwards position during adjusting the screw, adjusting the poles or removing the clamp.
The flap in the downwards position will cause it to tighten onto the pole. Flathead screwdrivers work best for screw adjustments.
During any and all pole adjustments, make sure to loosen your clamps to allow the poles to move freely rather than forcing the poles to budge causing scratching. Cosmetic damages caused by assembly errors are not covered under warranty.