Your CosmoGlo has an adjustable clamp that allows you to raise and lower the height of your light. The clamp has three parts, the circular clamp itself, a long, reverse-threaded screw, and a screw flap. The screw can be loosened or tightened as needed to help you adjust the height using a philips head or flathead screwdriver. Turn screw to the left to tighten, and right to loosen.
Please see video below to reattach your clamp flap should it come off during initial height adjustment.
Steps to Reattach your Clamp Flap
- Insert clamp screw with the large round screw head/top on the left
- Hold the flap next to the screw, facing down with the slanted edge towards the poles.
- Turn your screw to the left to begin threading into the flap.
- Adjust as needed until the light is stable when the flap is down, and moves when the flap is up.
NOTE: If you received a light very recently, you may have our new style clamp. The new clamp has a turn knob for tightening, and is secured to your poles with one normal phillips style screw. Please submit a request to Support if you are having issues with your new clamp.
Find immediate information and faqs online through our Help Center.
Reach out to our support team if you need any help or advice with this topic, or any other issue. Please include your name, order number and any relevant pictures or videos that will help us help you. If possible, please use the same email address used to place your order when submitting support requests. This will help us help you faster!