About the CosmoGlo Wheel Kit
Just roll with it! The CosmoGlo Wheel Kit was created exclusively for CosmoGlo Lights. Upgrade your CosmoGlo with a Wheel Kit for:
Enhanced Mobility: Move your light around effortlessly with increased functionality.
Added Stability: The added weight from the wheels increases stability, giving you peace of mind while using your CosmoGlo.
Increased Height: Gain an extra 2.75 inches in height, providing better ergonomics and flexibility in your space.
Simple Installation: Installing the wheels is a breeze, making it simple for anyone to enhance their CosmoGlo.
Wheel Lock Mechanism: Includes 2 regular wheels and 2 locking wheels for added convenience.
Fits ANY CosmoGlo Base: Whether you have an Original or XL, the wheel kit is sure to fit your base.
Every kit includes a set of permanent, pre-applied adhesive wheels, a cord clip, and alcohol wipes for smooth application.
2 Locking swivel caster wheels
2 Regular swivel caster wheels
4 alcohol wipes
1 cord clip
Purchase wheels and watch the Application Tutorial on our website, Here.
BEFORE APPLYING
- Adding wheels will increase the height of the light by 2.75 inches. Measure under beds before applying to the base, as lights may not still fit.
-
Wheels are a permanent modification and are not removable once adhered. Once the adhesive wheels are applied to the base, they should not be removed and reapplied at any point or the adhesive will no longer be viable.
How to Apply Wheels
1. Prepare the Light: Lay the light on its side on a soft surface, such as a towel or blanket.
2. Remove the Rubber Feet: Use a credit card or similar to carefully remove the rubber feet from the bottom of the light.
3. Clean the Surface: Use alcohol swabs to clean the entire corner application area where the wheels will be placed to remove dust, debris, or residue. Allow the area to dry completely.
4. Apply Cord Clip: Position the cord clip parallel to the base, with the cord passing through its center. Unclip, adjust the light, secure it, and reclip to prevent wire damage.
5. Apply Wheels: Pair each locking wheel with a non-locking wheel. Arrange the locking wheels diagonally across from each other on the front and back of the base, with non-locking wheels in the opposite corners, forming an X-pattern.
6. Remove the wheel backing: Align and stick each wheel in the designated corners just shy of the edges. Press down firmly for proper adhesion. Repeat for all four wheels and the cord clip to ensure stability when the wheels are locked. Be careful not to pull or tug on any part of the wheel or adhesive during the process, as this can weaken the bond.
7. Set Up Your Light: Secure the top halo to prevent swinging when lifting the light upright. Allow 24 hours for the adhesive to cure before moving or using your light!
Proper Use and Safety Notes
- Always lock the wheels for safety. Step down to lock and pop up to unlock.
- Keep the cord clipped while the light is being moved to prevent entanglement with the wheels.
- Unclip the cord when adjusting the height of the light and reclip it afterward.
- Ensure weight is evenly distributed across all four wheels at all times.
- Avoid wedging, forcing the light under beds or chairs, or leaning it during use, as this can compromise the wheel adhesive.
- Leave the light and wheels standing in place for at least 24 hours without rolling, moving, or adjusting the wheels or the light itself at any point until the glue is fully cured.
- Using or moving before the glue cures can cause the wheels to come off and pose a safety hazard. If a wheel comes off or you need new adhesive pads, please reach out to support so we can assist you.
Find immediate information and faqs online through our Help Center.
Reach out to our support team if you need any help or advice with this topic, or any other issue. Please include your name, order number and any relevant pictures or videos that will help us help you. If possible, please use the same email address used to place your order when submitting support requests. This will help us help you faster!
-
Contact us - CosmoGlo Website
-
Visit our Help Center to read articles or submit a request
-
Email: support@thecosmoglo.com
-
Message us on Instagram