Prep:

-Remove any previous remaining logo letters, and gently clean with a microfiber cloth and water.

-Allow to fully dry and dust away any remaining particles.

-Get out a credit card or similar item.

Steps:

-Visually position the logo where you'd like it on the light.

-Remove the backing on the logo until you have just the clear sticky side with letters.

-Place logo on light gently until aligned and ready to stick.

-Using a credit card or other firm card, gently rub over the silver letters to set the logo in place.

-Gently peel off the clear front.

-If any letters start to come up with the clear front, stick the entire clear piece back down and repeat the card rub, and peel again.